Causes of press cloth damage

Breakage and damage of press cloth is a common problem when using filter press.The majority of users in liquid filtration filter cloth damage.The only solution is to replace it, which not only affects production efficiency but also causes economic losses. Filter cloth suppliershares with you.

There are three common causes of press cloth damage:

1. Press cloth quality is the main reason for press cloth breakage.Today's press cloth is woven from fibers.Usually, the quality of the fiber affects the quality of the press cloth.Press cloth woven with short fibers breaks more easily than cloth woven with long fibers.Therefore, in order to reduce the loss, it is best to choose a high-quality press cloth.The appropriate press cloth type must also be selected based on the filtration process.

1. Press cloth quality is the main reason for press cloth breakage.Today's press cloth is woven from fibers.Usually, the quality of the fiber affects the quality of the press cloth.Press cloth woven with short fibers breaks more easily than cloth woven with long fibers.Therefore, in order to reduce the loss, it is best to choose a high-quality press cloth.The appropriate press cloth type must also be selected based on the filtration process.

2. Place the filter cloth in the middle of the filter plate on the filter press.By applying strong pressure to the entire filter plate, the press cloth is fixed to the belt filter press.When the filter plate is worn or deformed, the pressure on the press cloth will be uneven in the equipment, with high pressure in some places and loose in others.These places tend to cause the press cloth to move and cause it to tear.

3. Filtrate is also one of the important reasons for the damage to press filter cloth.Due to the large amount of solids in the filtrate and the temporary storage of solids trapped in the press cloth by the filter press, it is easy to damage the press cloth when the solid particles have sharp shapes.

Liquid Filtration Filter Cloth

After understanding these reasons, everyone can solve the problem of filter cloth damage from the source. In this process, forming a good habit of multiple inspections and maintenance is the best way to prevent filter cloth damage.In the filter work of the filter press, the filter cloth is an important part of the filter press, which has a great influence on the normal operation of the filter. If the filter cloth is damaged, folded or wrinkled during the work, it will affect the filtration efficiency of the equipment and needs to be resolved in time.The wrinkles of the filter cloth are usually caused by incorrect alignment. Insufficient tension can also cause the filter cloth to wrinkle. Although the filter is equipped with a counterweight rotating wheel to tighten the filter cloth, the wheel also needs to be counterweighted. There is a slot on the roller slider, which can be used by adding weight.

Sometimes depositing solids on the filter cloth roll or sliding adjustment block can cause the filter cloth to misalign and wrinkle. When this happens, stop the filter first, then thoroughly clean the roller and sliding adjustment block. Turn on the drive, then readjust the filter cloth to center and tighten it. Then carefully observe the accumulation of solids during normal operation of the filter. If necessary, increase the amount of rinse water to remove residual solids.The custom wire cloth supplier reminds you: everyone must center the filter cloth without wrinkling in the process of solving the problem of filter cloth. Only in this way can the solid-liquid separation work be successfully completed and appropriate equipment treatment effects can be exerted.